Basic Info.
Certification
CE, ISO, FDA
Alarm Form
Sound and Light Alarm
Item
Metal Detector for Foods
Belt
Food Grade White PU/PVC Belt, Approved FDA
Type
Conveyor Belt Type Metal Detector
Detection Opening/Aperture Size
40X15cm,40X18cm,50X20cm,50X25cm....
Grade
Food Grade Metal Detectors
Main Material
SUS304,SUS201,PVC/PU Belt
Capacity
Bearing 25 to 50kg Products
Detects Particles
All Metals Ferrous(Iron),SUS, Al,Cu
Transport Package
Polywood Case
Specification
Metal Detector for Food
Product Description
High Sensitive Conveyor Belt Type Metal Detector for Foods
In the food production industry, metal is one of the most commonly found contaminant materials in food. Metal can be introduced at all stages of processing of food, as it is most commonly used in the construction of machinery, handling equipment and ancillary utensils. A metal detector for the food industry can help ensure the safety and integrity of a wide range of unpackaged, packaged or bulk goods, by identifying metal contaminants during processing or packaging and helping to ensure that they do not enter food that we eat. As part of a HACCP program, metal detection systems can be utilised to provide compliance with food safety standards, retailers' code of practice, legislation and industry guidance.
Types of Contaminants
There are three main groups of metallic contaminants that a food metal detector can sense:
Ferrous
Non Ferrous
Stainless Steel detection depends on the magnetic or conductive properties of the contaminant
The ability for a conventional metal detector used in the food industry to detect metallic contaminants depends upon their conductivity and magnetic permeability:
Ferrous metal contaminants are both magnetic and conductive and are easily detected.
Although they are not magnetic, Non-Ferrous contaminants are good conductors and can be detected relatively easily.
Stainless Steel foreign bodies are the most difficult to pick-up as they are usually non-magnetic and a poor electrical conductor. The ability to detect stainless steel is also hindered when the product is wet or has a high salt content.
If there are other types of contaminants (glass, calcified bone, ceramics, stone) to be detected, then an X-ray inspection system for food will offer enhanced detection capabilities.
Features:- Phase tracking function, which can maintain the stable high-sensitivity detection ability.
- Product tracking function, which can do adjustment and compensation according to the changes of the product effect automatically.
- Auto-balanced calibration function, which can ensure the service life of the machine.
- Applying high functional FPGA, plan with Single Chip Machine.
- Above 52 products can be restored in product database.
- IP66 dust and water proof.
- The performance of the conveyor belt is complied with the American food sanitation standard (FDA), it can be used for inspection of the unpacked food directly.
- Can stably work for a long time, with a special design that is suitable for a harsh production environment of strong vibration and high interference, the equipment won't miss alarm even when you tap the probe.
Specifications:
Material: 304 type stainless steel for detector, 201 type stainless steel for frame, PVC/ PU white belt.
Belt length (mm): 1500mm.
Conveyor height from belt to ground 750mm + 100mm feet adjuatable, with wheels moveable.
Alarm: buzzer / warning lights.
Rejection system:- Stop on Detect Reject(<=50KG) - The conveyor system stops if metal is detected and an alarm sounds, enabling the operator to remove the contaminated product.
- Pusher Reject(<=10KG) - Pneumatically powered pushers divert contaminated product out of the production flow/ belt, see below picture.
- Flap Reject - End Flap/Lift Flap reject mechanism are typically used to remove contaminated and/or out of spec dry bulk products. Product passes through a chute which in the open position allows good product to continue through. The end flap or lift flap is triggered to divert contaminated or out of spec product out of the good product flow.
Flow speed: 25 m/ min fixed or 10 to 40 m / min variable.
Flow direction: from left to right or opposite(facing control panel).
Language for operation system: English/Spanish.
Electronic source: AC110V/220V, 50/60Hz, power: 90/120/200W.
Aperture/ Opening inner size & Sensitivity ability: Opening Width | 40 | 40 | 50 | 50 | 50 | 60 |
Opening Height | 15 | 18 | 15 | 20 | 25 | 30 |
Ferrous | Φ0.8mm | Φ0.8mm | Φ0.8mm | Φ1.0mm | Φ1.2mm | Φ1.5mm |
Non Ferrous | Φ1.0mm | Φ1.5mm | Φ1.2mm | Φ1.5mm | Φ1.8mm | Φ2.0mm |
Stainless steel(304) | Φ1.5mm | Φ2.0mm | Φ2.0mm | Φ 2.0mm | Φ2.5mm | Φ3.0mm |
Remark: the above data is empty-loaded machine sensitivity. The real sensitivity will be lower on condition of different products being tested.
Save
Address:
No. 3, Building a, Xintian Street, Bozhoubian, Dongcheng District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Security & Protection, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Junhong Electronic and Technology (Dongguan) Co., Ltd. Established in 2 0 0 5, who has been specialized in research and development of measurement instruments for 14 years. Supplying various of products range: Body Temperature Measurement System, Walk through metal detector, hand held metal detector, industrial metal detector, check weigher, underground metal detector, X-ray inspection machine, etc. All products are conform to U S and E U standard. Junhong has its own fabrication company to lower the cost of mechanical parts, and we in turn extend this discount to the customer. Most of all, we buy primarily from China reliable vendors and manufacture. Assembling at our at our headquarters and branches gives us direct control over quality and improved manufacturing efficiency, all this we pass onto the customer in lead time, reliability and value. The Junhong team is comprised of experienced professionals that are experts in the field of security protection, and know it′s markets, applications and products firsthand. We do not just want to sell you a machine, we want to be your go-to source for answers - including how to choose the appropriate products. We also supply operator training, operation tips and more. We sincerely welcome customers from both at home and abroad to cooperate with us to develop friendly and mutually beneficial business relationships for long term.