Basic Info.
Customized
Non-Customized
Application
Museum, Security Inspection
Installation Mode
Contact Type
Alarm
Audible and Visual Alarms
Transport Package
as Your Requirement
Specification
ISO9001, CE
Product Description
Multi-zone Security Walk Through Metal Detector (JH-33Z)
The JH-33Z ( LCD, 33 zone ) modular design allows for a quick and easy assembly of its 4 sub-assemblies using only 8 screws and 3 internal electrical connections. This can easily be done in situ by two people.
Pinpoint Detection Zones
There are 33 Distinct Pinpoint Detection Zones on the JH-33Z ( LCD, 33 zone ) for full target coverage on the left, centre and right side of the body from head to toe. The sensitivity on the 6 vertical zones can be set individually to target any part of the body.
Entry Pacing Lights
On the front of the archway on both legs are two traffic light style pacing lights. They are internationally recognized symbols at an easy to view eye level and help to control any queues that may form.
Overhead Control Unit
The main control panel is housed in the overhead control unit. This houses the LCD display, alarm lights, LED bar graphs and the control touch pads. All of the wiring, connections and electronics are integrated into the overhead unit which is lockable for security. The control touchpad is also lockable to prevent any unauthorised access.
Multi-dimensional Coil Design
The JH-33Z ( LCD, 33 zone ) is exclusive multi-dimensional coil design provides unmatched detection of potentially lethal metal items such as guns, knives and other flat and rod-shaped weapons regardless of location and orientation.
Audible and Visual Alarms
There is an audible alarm as well as visual LED lights signal when a target has been detected. The Pinpoint lights on the back of the archway will show where on the body any offending object may be.
Touchpad Controls
The JH-33Z ( LCD, 33 zone )'s Access Control Panel is designed for use by authorized personnel with specific, multi-level security codes. It allows authorized users to change settings such as detection Program and Sensitivity. Security of the detector's settings is maintained with a non-resettable sequence code, which indicates every attempt at access to the settings. A tamper alarm sounds within 10 seconds after the Access Touchpad is pressed, unless a proper access code is entered. This can be backed up by the use of a key to operate the touchpad.
The JH-33Z (LCD, 33 zone) maintains all settings even when disconnected from power and does not require recalibration each time the unit is turned OFF and back ON. No battery is required for memory retention. While the unit is in operation, a self-test of all systems is performed continuously with any failures or problems immediately reported on the LCD display.
Specifications:
1) Operating Temperatures
-20° C to + 70° C; Humidity: To 95% non-condensing
2) Power Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 5 watts; No rewiring, switching or adjustments required.
3) Weatherproofing / Foreign Object Protection Standards
Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures, " IEC 529.
4) Tamper-Proof
All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.
5) Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control devices.
6) Traffic Counter
Counter tracks the number of patrons that have passed through the detector, the number of alarms and calculates alarm percentage.
7) Synchronization
Dual channels and DSP circuitry allow several JH-33Z's to operate simultaneously in close proximity to one another.
8) Interference Suppression
DSP built-in circuitry eliminates effects from X-ray monitors and other potential electrical interference sources.
9) Programmes
Sixteen (16) independent programs designed to meet all installation-specific requirements including the new TSA Enhanced Metal Detector (EMD) System requirements for airports.
Address:
No. 3, Building a, Xintian Street, Bozhoubian, Dongcheng District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Security & Protection, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Junhong Electronic and Technology (Dongguan) Co., Ltd. Established in 2 0 0 5, who has been specialized in research and development of measurement instruments for 14 years. Supplying various of products range: Body Temperature Measurement System, Walk through metal detector, hand held metal detector, industrial metal detector, check weigher, underground metal detector, X-ray inspection machine, etc. All products are conform to U S and E U standard. Junhong has its own fabrication company to lower the cost of mechanical parts, and we in turn extend this discount to the customer. Most of all, we buy primarily from China reliable vendors and manufacture. Assembling at our at our headquarters and branches gives us direct control over quality and improved manufacturing efficiency, all this we pass onto the customer in lead time, reliability and value. The Junhong team is comprised of experienced professionals that are experts in the field of security protection, and know it′s markets, applications and products firsthand. We do not just want to sell you a machine, we want to be your go-to source for answers - including how to choose the appropriate products. We also supply operator training, operation tips and more. We sincerely welcome customers from both at home and abroad to cooperate with us to develop friendly and mutually beneficial business relationships for long term.
){kind=link}